So here we go!
The start of our 5 hours Power Cage (Power Rack) assembly process!
We started off at around 9pm and finish assembling the Power Cage with the lat attachment at 2am!
The assembling of the power cage starts off with putting the main structure which is the cage is itself together.
Let the pictures do the talking.
The largest box contains the top and base of the Power Cage, it also contains some other little stuff of the Power Cage.
Opening the box...
The two smaller boxes within actually contains the Chin up bar that is to be attached to the Power Cage and the barbell position holders.
The Power Cage cannot do without its vertical support.
The long boxes contains the vertical support which is around 2 to 2.2m long.
All these came with an instruction sheet telling you what is inside the boxes and how the Power Cage is to be assembled.
And of course, the screws and bolts!
Everything is nicely labelled. The instructions in the manual were all clear, telling you clearly which screw to use, what size to use, which bolt to go with which screw etc.
In our next post, we were be posting more pictures on the setting up of the Power Cage, Stay tune!
